How to deal with some problems encountered in the flagpole daily flag-raising process?

flagpole

Stainless steel flagpole in the encounter the following problems we should deal with:

1, when the flag is raised, the flagpole cannot be shaken: whether manual or electric can not carry out normal flag-raising, it is necessary to check whether the steel wire rope of the stainless steel flagpole has been worn or is stuck, and the steel wire rope is in a mess, then only the replacement of the steel wire rope can be used normally or the steel wire rope is straightered again;

2, if it is found that the red flag can not be lowered at the time of lowering the flag, this time it is required to check whether the counterweight pole is damaged, in such a case, it must be replaced and repaired by the flagpole manufacturer;

3, If the stainless steel flagpole appears and the red flag pole falls down, but the counterweight pole of the flagpole is intact, it may be that there is no fixed only need to be fixed again;

4, stainless steel flagpole if the flagpole Buddha beads fall, we should open the wire rope lock in time and then re-join the Buddha beads, so as to prevent the phenomenon of the flagpole when the flag is raised;

5, if it is a wind-driven flagpole, then many people will ignore the dust of the flagpole fan, every half a year we have to carry out the corresponding cleaning dust, foreign matter to ensure the normal use of the flagpole, the machine and flagpole is also the biggest benefit.

Please inquiry us if you have any questions about our products.

You also can contact us by email at ricj@cd-ricj.com


Post time: Oct-24-2023

Send your message to us:

Write your message here and send it to us